West Vancouver

Tile Contractor in West Vancouver

West Vancouver tile contractor for high-end custom work: bookmatched stone, porcelain slab, wet rooms, and bathroom renovations finished to architectural standards, from Ambleside to the British Properties.

Request a Quote
Marble-look tile shower and bathtub surround with glass shower enclosure

Where the material leads

West Vancouver projects tend to start with the material: a specific marble, a bookmatched slab sequence, porcelain panels at architectural scale. Our job is to make sure the installation deserves it. That means flatness control measured before stone arrives, layouts resolved around sightlines from the room’s main vantage points, and waterproofing that will outlast the finish.

The housing is two stories at once. The 1950s and 60s post-and-beam homes in Altamont, Sentinel Hill and the British Properties are being rebuilt or renovated to the studs, and the waterfront and hillside are filling with architect-designed houses where the finish schedule names the stone. Ambleside and Dundarave carry the low-rises. Much of our large-format and natural stone experience comes from homes like these, where the level of the architecture leaves nowhere for sloppy lines to hide.

What West Vancouver hires us for

Custom tile installation is the heart of our work here: bookmatched marble and porcelain slab walls, mitred outside corners with no metal trim, feature floors set out on paper, and drawings from the architect built exactly. Bathroom renovations in these homes are usually wet rooms, with the tub inside the tiled zone and a curbless shower draining to a linear channel. Shower tile installation on its own comes up in the older homes, where a 1960s shower is finally being replaced.

Kitchen renovations bring slab backsplashes and stone floors that run through to the terrace. We also take commercial tile along Marine Drive and at Park Royal.

Working to drawings

Most West Vancouver projects come with a designer or an architect, and that’s our preferred way to work. We review the drawings against the room and the material, flag anything the tile or the space can’t do, and then build what’s drawn. The Calacatta wet room on the North Shore is the standard we bring: bookmatched slabs folding into a single chevron, a curbless floor pitched to one drain, and a marble bench mitred to read as a solid block.

If you have drawings or a material in mind, request a quote. We’ll start with what the layout and the stone need.

Tile services in West Vancouver

What we install in West Vancouver.

Neighbourhoods we work in

Ambleside, Dundarave, British Properties, Altamont, Caulfeild, Sentinel Hill, Horseshoe Bay, Cypress Park, and the rest of West Vancouver. If your address is just outside those, ask anyway; the answer is usually yes.

FAQ

Common questions in West Vancouver.

Can you install bookmatched stone walls?

Yes. Bookmatching is layout work above all: slabs or large tiles are sequenced so the veining mirrors across joints, which means the pattern has to be resolved on paper before the first piece is set. We've built full bookmatched wet rooms.

Do you work with designers and architects?

Regularly. Drawings, specified materials, and tight detailing are welcome here; the more resolved the design intent, the better the installation can serve it.

How do you handle natural stone in wet areas?

Stone in showers needs the right sealing schedule, setting materials matched to the stone, and waterproofing beneath everything. We treat the assembly as one system from substrate to sealer.

Do you take on whole-house tile packages for a rebuild?

Yes. New builds and full renovations in West Vancouver often carry tile through every bathroom, the kitchen, the entry and the fireplace. We hold the schedule alongside the builder and keep the layout consistent through the house.

Nearby

Tile contractor near West Vancouver.

Working in West Vancouver

Planning tile work? Start with the scope.

Request a Quote